Sugarhouse Sums › Brix and density

Maple Syrup Brix, Density and Weight

A US gallon of finished maple syrup (66.9 °Brix) weighs about 11.0 lb, or 1.32 kg per litre. Sap at 2% weighs about 8.4 lb per gallon, barely more than water.

Brix, density and weight

Sap 1–4, finished syrup 66–67.

Advertisement
Ad space

Brix to density and weight

Sucrose solutions near room temperature
°BrixDensity (kg/L)lb per US galSugar per US gal
00.99828.330 lb
11.00218.360.08 lb
21.0068.40.17 lb
31.00998.430.25 lb
41.01398.460.34 lb
101.03838.670.87 lb
201.08149.021.8 lb
401.17659.823.93 lb
601.283410.716.43 lb
641.306210.96.98 lb
661.3178117.26 lb
66.91.32311.047.39 lb
681.329511.097.54 lb
701.341311.197.84 lb

Uses for this chart

These are sucrose figures. Real syrup also contains small amounts of other sugars and minerals, which shift density very slightly.

Questions sugarmakers ask

How much does a gallon of maple syrup weigh?

About 11 lb (5 kg) for finished syrup at 66–67 °Brix.

What Brix should maple syrup be?

Most standards ask for at least 66 °Brix; many producers aim for 66.9–67. Vermont requires at least 66.9.

How we calculate: sap-to-syrup ratios come from a sugar mass balance using sucrose solution densities (sap and syrup are mostly sucrose), shown next to the familiar Rule of 86. Finished syrup is taken as 66.9 °Brix unless you change it. Tapping guidelines follow the conservative diameter rules published by US university extension services (Maine, Cornell, Utah State). Boiling uses about 8,100 BTU to evaporate one US gallon of water. Figures are estimates for planning, not a guarantee of yield or quality.