Sugarhouse Sums › Fix thick or thin syrup
Fix Maple Syrup That Is Too Thick or Thin
To thin a gallon of syrup from 69 to 66.9 °Brix, stir in about ⅔ cup (about 160 ml) of water. To thicken a gallon from 64 to 66.9 °Brix, boil off about 7 fl oz (about 215 ml) more water. The calculator works it out for any amount from your Brix reading.
Water to add per gallon of thick syrup
| Syrup is at | Add water (to 66.9) | Add 2% sap (to 66.9) |
|---|---|---|
| 67.5 °Brix | 45 ml (1.5 fl oz) | 46 ml |
| 68 °Brix | 83 ml (2.8 fl oz) | 85 ml |
| 69 °Brix | 159 ml (5.4 fl oz) | 163 ml |
| 70 °Brix | 236 ml (8 fl oz) | 241 ml |
| 72 °Brix | 391 ml (13.2 fl oz) | 400 ml |
| Syrup is at | Boil off (per gallon) |
|---|---|
| 60 °Brix | 501 ml (16.9 fl oz) |
| 62 °Brix | 359 ml (12.1 fl oz) |
| 64 °Brix | 214 ml (7.2 fl oz) |
| 65 °Brix | 141 ml (4.8 fl oz) |
| 66 °Brix | 67 ml (2.3 fl oz) |
How it works
Adding or removing water does not change the sugar. The calculator converts your syrup to kilograms of sugar and water using its density, then finds the mass of water (or sap) that brings the sugar fraction to the target. Sap adds a little sugar of its own, so it takes a bit more sap than plain water.
Questions sugarmakers ask
Why does my maple syrup have crystals?
Usually it was boiled slightly too thick (above about 68 °Brix). Warm the bottle gently in hot water to dissolve them, and next time draw off a degree sooner or thin with a little water.
Can I re-boil thin syrup?
Yes. Bring it back to a boil and take it to the target density again, then filter and bottle hot.
How we calculate: sap-to-syrup ratios come from a sugar mass balance using sucrose solution densities (sap and syrup are mostly sucrose), shown next to the familiar Rule of 86. Finished syrup is taken as 66.9 °Brix unless you change it. Tapping guidelines follow the conservative diameter rules published by US university extension services (Maine, Cornell, Utah State). Boiling uses about 8,100 BTU to evaporate one US gallon of water. Figures are estimates for planning, not a guarantee of yield or quality.