Sugarhouse Sums › Sap for a gallon of syrup
How Much Sap to Make a Gallon of Syrup?
You need about 44 US gallons of sap for 1 gallon of syrup if the sap is 2% sugar. At 3% it is about 29 gallons; at 1.5% about 59. The often-quoted “40 to 1” assumes sap a little above 2%.
Sap needed for one gallon of syrup
| Sap sugar | Sap needed | Water you boil off | Rough boil on a 2×3 pan |
|---|---|---|---|
| 1.5% | 58.8 gal (222 L) | 57.7 gal | 9.6 h |
| 1.8% | 48.9 gal (185 L) | 47.8 gal | 8.0 h |
| 2% | 44 gal (167 L) | 42.9 gal | 7.2 h |
| 2.2% | 40 gal (151 L) | 38.9 gal | 6.5 h |
| 2.5% | 35.1 gal (133 L) | 34.1 gal | 5.7 h |
| 2.8% | 31.3 gal (119 L) | 30.3 gal | 5.0 h |
| 3% | 29.2 gal (111 L) | 28.2 gal | 4.7 h |
Why it is not always 40 to 1
“Forty to one” is a slogan, not a constant. Sap sugar depends on the tree species, the individual tree, last summer’s growing conditions and the point in the season. Sap often starts sweeter and thins out late in the run. Two neighbours can both be right with 30:1 and 55:1.
Collect a little extra
Plan for 5–10% more sap than the table shows. A small batch loses a larger share to the filter, to sugar sand and to syrup clinging to the pan, and first-timers often scorch or discard a little.
Questions sugarmakers ask
Is it 40 or 43 gallons of sap per gallon of syrup?
Both are rounded figures. At exactly 2% sugar the Rule of 86 gives 43 and a sugar mass balance gives about 44. At 2.15% you are at 40.
How much sap does one tree give in a season?
A single bucket tap typically gives 5–15 gallons of sap in a season, so one tap makes roughly a quart of syrup. See the syrup-per-tap guide for details.
How we calculate: sap-to-syrup ratios come from a sugar mass balance using sucrose solution densities (sap and syrup are mostly sucrose), shown next to the familiar Rule of 86. Finished syrup is taken as 66.9 °Brix unless you change it. Tapping guidelines follow the conservative diameter rules published by US university extension services (Maine, Cornell, Utah State). Boiling uses about 8,100 BTU to evaporate one US gallon of water. Figures are estimates for planning, not a guarantee of yield or quality.