Sugarhouse Sums › Syrup per tap

How Much Syrup per Tap?

Roughly 1 quart of syrup per tap per season on buckets (10 gallons of 2% sap). Commercial tubing on vacuum averages about a third to half a gallon per tap. A big tree with three taps can make close to a gallon in a good year.

Season syrup estimate

Buckets/bags: 5–15 gal is typical. Tubing on vacuum: 15–25+.

Advertisement
Ad space

Syrup per tap chart

US quarts of syrup per tap
Sap per tap (season)At 1.5%At 2%At 2.5%At 3%
5 gal0.34 qt0.45 qt0.57 qt0.68 qt
8 gal0.54 qt0.73 qt0.91 qt1.1 qt
10 gal0.68 qt0.91 qt1.14 qt1.37 qt
15 gal1.02 qt1.36 qt1.71 qt2.05 qt
20 gal1.36 qt1.82 qt2.28 qt2.74 qt
25 gal1.7 qt2.27 qt2.85 qt3.42 qt

Per tree, not just per tap

Multiply by the taps each tree can carry (see taps per tree). A 20-inch tree with two bucket taps at 10 gallons each and 2.5% sap gives about 2.3 quarts.

What the industry averages mean for you

Published state and national averages (around a third of a gallon per tap in recent USDA reports) come mostly from large operations on vacuum tubing. Backyard buckets usually land below that, so the quart-per-tap rule is the safer plan.

Questions sugarmakers ask

How much syrup does one maple tree make?

About a quart per tap per season on buckets. A tree large enough for two or three taps can make two to three quarts.

How many taps do I need for a gallon of syrup?

About four bucket taps at 10 gallons of 2% sap each, and five or six to be safe.

How we calculate: sap-to-syrup ratios come from a sugar mass balance using sucrose solution densities (sap and syrup are mostly sucrose), shown next to the familiar Rule of 86. Finished syrup is taken as 66.9 °Brix unless you change it. Tapping guidelines follow the conservative diameter rules published by US university extension services (Maine, Cornell, Utah State). Boiling uses about 8,100 BTU to evaporate one US gallon of water. Figures are estimates for planning, not a guarantee of yield or quality.