Sugarhouse Sums › Evaporator size

What Size Evaporator for My Taps?

Size the evaporator to boil a big run day’s sap in one session. With bucket taps that can mean 1–2 gallons per tap. A 2×3 ft flat pan (about 6 gal/h) suits roughly 10–25 taps; 2×4 ft about 20–40; a 2×6 with a flue pan about 50–100 or more.

Hours to boil a run day’s sap

Rate below uses the same unit per hour.

Best: measure your own.

Advertisement
Ad space

A big run day by number of taps

Using the high end (2 gal/tap) for the boiling hours
TapsSap on a big dayTime on a 2×3 panTime on a 2×4 pan
5 taps5–10 gal1.7 h on 2×31.3 h on 2×4
10 taps10–20 gal3.3 h on 2×32.5 h on 2×4
20 taps20–40 gal6.7 h on 2×35 h on 2×4
50 taps50–100 gal16.7 h on 2×312.5 h on 2×4
100 taps100–200 gal33.3 h on 2×325 h on 2×4

Rough fit of taps to setups

SetupTypical rateComfortable taps
Stove or turkey fryer0.25–2 gal/h1–5
Steam-table pans on a block arch1–3 gal/h5–15
2×3 ft flat pan~6 gal/h10–25
2×4 ft flat pan~8 gal/h20–40
2×6 ft with flue pan~15+ gal/h50–100+

Storage buys time

If sap can be kept cold (shaded, packed in snow or ice) you can boil every second or third day, which lets a smaller pan handle more taps. Sap does not keep for long once it warms, and cloudy or sour sap makes off-flavoured syrup, so plan around your coldest storage.

Questions sugarmakers ask

What size evaporator for 20 taps?

A 2×3 ft flat pan handles 20 taps on most days; on the biggest run days (40 gallons) expect 6–7 hours. A 2×4 is more comfortable.

Is a bigger pan always better?

Not for small batches. A pan needs enough sap to cover the bottom safely, so a large pan with little sap is harder to run without scorching.

How we calculate: sap-to-syrup ratios come from a sugar mass balance using sucrose solution densities (sap and syrup are mostly sucrose), shown next to the familiar Rule of 86. Finished syrup is taken as 66.9 °Brix unless you change it. Tapping guidelines follow the conservative diameter rules published by US university extension services (Maine, Cornell, Utah State). Boiling uses about 8,100 BTU to evaporate one US gallon of water. Figures are estimates for planning, not a guarantee of yield or quality.